Dellmeco.
Pump manufacturer.
If our partners succeed, then so does DELLMECO
/ Our products /
Plastic Series
Hygienic Series
Metal Series
SEMI Series
DMCX Series
Plastic DME Pumps
Metal DME Pumps
Hygienic DME Pumps
3A Aseptic Series
DMU Series
DMF Series
DMR Series
NEW! SXTT-X Series
Accessories
About us.
DELLMECO is a leading pump manufacturer since 2004.
We produce air operated and electro-mechanical double diaphragm pumps (AODD and DME series) with a wide range of accessories for industrial use.
We also offer state-of-the-art design and development in our new factory premises, supported by our internationally recognised ISO/TUV quality control system.
Leading-edge technology and engineering expertise combined with our extensive know-how ensure consistent high quality of our product range to meet our customer expectations.
DELLMECO aims for the best quality supported by research and development to meet the demands of modern pumping applications. Our goal is to stay ‘Out in Front‘ as the market leader.
Strategy.
To be the ‘best pump manufacturer‘ in the world.
Maintain a high corporate social responsibility (CSR) taking care of our customers, our work force and the environment To operate through a network of partnerships and co-operating distributors. Establish distribution centres in strategic countries/locations. Continue with strong innovation and R&D to stay ‘Out in Front‘.
SINCE 2004
About us.
DELLMECO is a leading pump manufacturer since 2004.
We produce air operated and electro-mechanical double diaphragm pumps (AODD and DME series) with a wide range of accessories for industrial use.
We also offer state-of-the-art design and development in our new factory premises, supported by our internationally recognised ISO/TUV quality control system.
Leading-edge technology and engineering expertise combined with our extensive know-how ensure consistent high quality of our product range to meet our customer expectations.
DELLMECO aims for the best quality supported by research and development to meet the demands of modern pumping applications. Our goal is to stay ‘Out in Front‘ as the market leader.
Strategy.
To be the ‘best pump manufacturer‘ in the world.
Maintain a high corporate social responsibility (CSR) taking care of our customers, our work force and the environment To operate through a network of partnerships and co-operating distributors. Establish distribution centres in strategic countries/locations. Continue with strong innovation and R&D to stay ‘Out in Front‘.
/ Meet our Team /
Wieslaw
Chief Technology Officer
Jacob
Main Engineer
Matthew
Chief Operating Officer
Natalie
Chief Administrative Officer
Anna
Key Account Manager
Estera
Customer Service Manager
Eva
Import/Export Manager
Wieslaw
Jacob
Matthew
Natalie
Anna
Estera
Eva
/ Watch our video /
/ Dellmeco manufactures /
for key industries
Chemical, petro-chemical, pharmaceutical
Semiconductor
Energy, solar, hybrid, bio-fuels
Minerals and mining
Biotechnology
Food and beverage
Ceramics
Paper manufacturing
Electro-plating
Environmental
Chemical, petro-chemical, pharmaceutical
Semiconductor
Energy, solar, hybrid, bio-fuels
Minerals and mining
Biotechnology
Food and beverage
Ceramics
Paper manufacturing
Electro-plating
Environmental
Manufacturing carried out in our modern factory – under ‚one roof‘ enables us to respond quickly to customer/market demands
Unique, compact and versatile design combining high-tech with proven reliability and quality
Air operated and electro-mechanical options with low air and energy consumption
Wide range of applications and specialised designs for liquids, powders, abrasive and/or corrosive media
SEMI series designed especially for ultra high purity chemicals such as used in the semiconductor and pharmaceutical industries
Housings machined from PE, PTFE, conductive PE and PTFE, aluminium, cast iron, AISI 316 (industrial) and AISI 316L (hygienic)
Designed to operate within a temperature range from -40 to +200 degrees Celsius
Can be installed in hazardous areas with explosion proof designs (ATEX)
’Out in Front’ of the industry standards: self-priming, can run dry without heat build-up or wear, adjustable flow by simple air/frequency regulation, long life diaphragms for heavy duty applications (no diaphragm discs), operating without lubrication or seals
Easy, preventive maintenance planning‘ (PMP) and minimum maintenance costs
Manufacturing carried out in our modern factory – under ‚one roof‘ enables us to respond quickly to customer/market demands
Unique, compact and versatile design combining high-tech with proven reliability and quality
Air operated and electro-mechanical options with low air and energy consumption
Wide range of applications and specialised designs for liquids, powders, abrasive and/or corrosive media
SEMI series designed especially for ultra high purity chemicals such as used in the semiconductor and pharmaceutical industries
Housings machined from PE, PTFE, conductive PE and PTFE, aluminium, cast iron, AISI 316 (industrial) and AISI 316L (hygienic)
Designed to operate within a temperature range from -40 to +200 degrees Celsius
Can be installed in hazardous areas with explosion proof designs (ATEX)
’Out in Front’ of the industry standards: self-priming, can run dry without heat build-up or wear, adjustable flow by simple air/frequency regulation, long life diaphragms for heavy duty applications (no diaphragm discs), operating without lubrication or seals
Easy, preventive maintenance planning‘ (PMP) and minimum maintenance costs
AODD PUMPS
CHARACTERISTICS
- Compact, solid design – minimum space required
- Excellent for abrasive liquids do not damage the pump and low shear for fragile applications like chemicals
- Can be used to pump water, viscous liquids with solids and even powders
- Sealless – no seals or packing to leak
- Safe in hazardous areas – air driven and non-sparking
- Can run dry without damage
- Self-priming to over 8 meters
- Variable flow – simply regulate the inlet air supply to adjust from zero to maximum flow
- Pump virtually stalls if discharge is closed and restarts when discharge is opened (no heat build-up or wear)
- Expensive systems for pressure relief are not required
- Composite, long life diaphragms (no disc) are smooth and not interrupted by seals
- Operates without lubrication
- Fully groundable
- Easy maintenance
- Internationally recognised certification
AODD PUMPS
CHARACTERISTICS
- Compact, solid design – minimum space required
- Excellent for abrasive liquids do not damage the pump and low shear for fragile applications like chemicals
- Can be used to pump water, viscous liquids with solids and even powders
- Sealless – no seals or packing to leak
- Safe in hazardous areas – air driven and non-sparking
- Can run dry without damage
- Self-priming to over 8 meters
- Variable flow – simply regulate the inlet air supply to adjust from zero to maximum flow
- Pump virtually stalls if discharge is closed and restarts when discharge is opened (no heat build-up or wear)
- Expensive systems for pressure relief are not required
- Composite, long life diaphragms (no disc) are smooth and not interrupted by seals
- Operates without lubrication
- Fully groundable
- Easy maintenance
- Internationally recognised certification
DME PUMPS
BASIC INFORMATION
PLASTIC SERIES
METAL SERIES
HYGIENIC SERIES
DME PUMPS
BASIC INFORMATION
PLASTIC SERIES
METAL SERIES
HYGIENIC SERIES
This pump technology is especially designed for universal applications which require low pressure – up to 6 bar. DELLMECO DME is an Electromechanically Driven Double Diaphragm Pump that is highly energy efficient. It’s compact, special design does not require hydraulic fluid, and it can be suitalby equipped to provide the performance required by each specific application.
The DELLMECO Electromechanically Driven Double Diaphragm Pump’s design concept and low energy consumption when used, in the most diverse of applications by the most demanding of costumers, have helped solidify DELLMECO’s good reputation.
Demonstration designed by DELLMECO Germany showing the DELLMECO electro-mechanical pump (DME series) in operation.
Ranging from ½” to 3” and manufactured in a wide range of materials including plastic, aluminium, cast iron and stainless steel this gives the customer great flexibility in solving their pumping requirements.
This pump technology is especially designed for universal applications which require low pressure – up to 6 bar. DELLMECO DME is an Electromechanically Driven Double Diaphragm Pump that is highly energy efficient. It’s compact, special design does not require hydraulic fluid, and it can be suitalby equipped to provide the performance required by each specific application.
The DELLMECO Electromechanically Driven Double Diaphragm Pump’s design concept and low energy consumption when used, in the most diverse of applications by the most demanding of costumers, have helped solidify DELLMECO’s good reputation.
Demonstration designed by DELLMECO Germany showing the DELLMECO electro-mechanical pump (DME series) in operation.
Ranging from ½” to 3” and manufactured in a wide range of materials including plastic, aluminium, cast iron and stainless steel this gives the customer great flexibility in solving their pumping requirements.
/ Research & Development /
DELLMECO ARE DEVELOPING NEW AND INNOVATIVE TECHNOLOGIES SO WE STAY ‘OUT IN FRONT’
Our DME electro-mechanical series have been up-graded to simplify maintenance. Your customer ‘preventive maintenance planning’ (PMP) can now be completed within minutes so there is no disruption to long lasting, trouble-free pumping operations.
Sometimes the customer just needs a simple pump which is cost-effective, easy to install and can be used for a ‚one-off‘ application. We are using the latest high-tech technologies developed in partnership with leading Universities in Poland to manufacture and produce 3D Printed AODD pump parts. These are far superior and stronger with improved wear and shock resistance to any moulded pumps presently on the market. And ‚cheap as chips‘ to produce.
DELLMECO ARE DEVELOPING NEW AND INNOVATIVE TECHNOLOGIES SO WE STAY ‘OUT IN FRONT’
Our DME electro-mechanical series have been up-graded to simplify maintenance. Your customer ‘preventive maintenance planning’ (PMP) can now be completed within minutes so there is no disruption to long lasting, trouble-free pumping operations.
Sometimes the customer just needs a simple pump which is cost-effective, easy to install and can be used for a ‚one-off‘ application. We are using the latest high-tech technologies developed in partnership with leading Universities in Poland to manufacture and produce 3D Printed AODD pump parts. These are far superior and stronger with improved wear and shock resistance to any moulded pumps presently on the market. And ‚cheap as chips‘ to produce.
/ Certificates /
DELLMECO distribution network in countries: Australia, Austria, Belgium, Brazil, Bulgaria, Canada, China, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, India, Italy, Japan, Korea, Latvia, Lithuana, Malysia, Netherlands, New Zealand, Poland, Romania, Singapore, Slovakia, South Africa, South Korea, Sweden, Switzerland, Taiwan, Turkey, Ukraine, United Kingdom, Vietnam.
DELLMECO distribution network in countries: Australia, Austria, Belgium, Brazil, Bulgaria, Canada, China, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, India, Italy, Japan, Korea, Latvia, Lithuana, Malysia, Netherlands, New Zealand, Poland, Romania, Singapore, Slovakia, South Africa, South Korea, Sweden, Switzerland, Taiwan, Turkey, Ukraine, United Kingdom, Vietnam.